LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> RX-8 R3, 1.3 2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 557 (Dynamic Stability Control System) >> DSC HU/Cm Removal/Installation >> DSC HU/CM Connector Installation Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DSC HU/CM Connector Installation Note

WARNING: This page is about a different car, the 2010 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. After connecting the connector, verify that the lock lever is completely pushed in.
Fig 1: Pushing Lock Lever
G05985206Courtesy of MAZDA MOTORS CORP.