LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> RX-8 R3, 1.3 2 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Trunk Lid Open Cancel Switch Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Trunk Lid Open Cancel Switch Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the glove compartment.
  3. Squeeze the tabs of the trunk lid opener cancel switch and pull it forward to remove it.
  4. Disconnect the trunk lid opener cancel switch connector.
  5. Remove the trunk lid opener cancel switch.
  6. Install in the reverse order of removal.
Fig 1: Identifying Trunk Lid Open Cancel Switch And Connector
G04928938Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals