October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Check code 08
CODE INSPECTION CONDITION CHART
| Check code 08 |
TNS relay ON/OFF signal |
| STEP |
INSPECTION CONDITION |
DISPLAY |
ACTION |
| 1 |
Turn the headlight switch to the TNS position. (TNS relay ON). |
on |
Go to the next step. |
| oFF |
Verify that the voltage of instrument cluster terminal 1B is B+
.
- If the voltage is as specified, replace the instrument cluster.
- If the voltage is not as specified, inspect the following parts:
- TNS relay
- Wiring harness (Battery-TNS relay-Instrument cluster)
|
| 2 |
Turn the headlight switch off. (TNS relay OFF). |
on |
Verify that the voltage of the instrument cluster terminal 1B is 1.0 V or less.
- If the voltage is as specified, replace the instrument cluster.
- If the voltage is not as specified, inspect the following parts:
- TNS relay
- Wiring harness (TNS relay-Instrument cluster)
|
| oFF |
Input signal to the instrument cluster is normal. |