LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> CX-9 Touring, 3.7 A, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System/Roll Stability Control System >> DSC/RSC HU/Cm Removal/Installation >> Brake Pipe Installation Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Brake Pipe Installation Note

  1. Align the marks made before removal and install the brake pipe to the DSC/RSC HU/CM and brake pipe joint.
  2. Tighten the brake pipe to the specified torque using the SST  (49 0259 770B) and the commercially available flare nut wrench.
    Fig 1: Identifying Master Cylinder
    G04970211Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals