LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Buckle Switch Inspection >> Passenger Side
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Passenger Side

  1. Switch the ignition to off.
  2. Disconnect the negative battery cable.
  3. Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION .)
  4. Remove the front buckle. (See FRONT BUCKLE REMOVAL/INSTALLATION .)
  5. Inspect for continuity between the buckle switch terminals using a tester.
    • If not as indicated in the table, replace the front buckle.
    Fig 1: Front Buckle Terminals Continuity Reference Chart (Passenger Side)
    G07626715Courtesy of MAZDA MOTORS CORP.
    Fig 2: Front Buckle Circuit (Passenger Side)
    G06206108Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals