October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Inspection Method For Sensors
- Connect the M-MDS (IDS) to the DLC-2.
- Switch the ignition to ON. (engine off)
NOTE:
- If the engine starts and runs, perform the following steps at idle.
- Access PIDs for the switch you are inspecting.
- Vibrate the sensor slightly with your finger.
- If the PID value is unstable or a malfunction occurs, inspect the for poor connection and / or poorly mounted sensor.