October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Relay Block Removal/Installation [With Advanced Keyless Entry And Push Button Start System]

Disconnect the negative battery cable.
Remove the lower panel. (See LOWER PANEL REMOVAL/INSTALLATION .)
Remove the knee bolster. (See KNEE BOLSTER REMOVAL/INSTALLATION .)
Remove the wiring harness clip.
Remove the clips.

Fig 1: Wiring Harness Clips
Courtesy of MAZDA MOTORS CORP.
Remove the relay block.

Fig 2: Relay Block
Courtesy of MAZDA MOTORS CORP.
Disconnect the connectors.
Install in the reverse order of removal.

Fig 3: Relay Block And Connector

G07622490

Courtesy of MAZDA MOTORS CORP.