LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> 3 i SV, 2.0 F >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System [L3 With TC]) >> Pcm Configuration
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Pcm Configuration

WARNING: This page is about a different variant/trim than selected.
  1. Connect the M-MDS to DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select the "Module Programming".
  3. Then, select items from the screen menu in the following order.
    1. Select "Programmable Module Installation".
    2. Select "PCM".
  4. Perform the configuration according to the directions on the screen.
  5. Retrieve DTCs by the M-MDS, then verify that there is no DTC present.
    • If a DTC (s) is detected, perform the applicable DTC inspection. (See DTC TABLE ).
      Fig 1: Identifying DLC-2
      G07868458Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals