October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
DSC HU/Cm Inspection: Notes
- Disconnect the DSC HU/CM connector. (See
DSC HU/CM REMOVAL/INSTALLATION .)
- Connect the negative battery cable. (See
BATTERY REMOVAL/INSTALLATION [MZR 1.5]
.)
- Attach the tester lead to the DSC HU/CM wiring harness-side connector and inspect the voltage, continuity, or resistance according to the standard (reference value) in the table below.