LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> 2 Touring, 1.5 Z, Standard >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Power Window SUBSWITCH Inspection >> Rear
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Power Window SUBSWITCH Inspection: Rear

  1. Disconnect the negative battery cable.
  2. Remove the sail garnish. (See SAIL GARNISH REMOVAL/INSTALLATION .)
  3. Remove the rear door garnish. (See REAR DOOR GARNISH REMOVAL/INSTALLATION .)
  4. Remove the rear door trim. (See REAR DOOR TRIM REMOVAL/INSTALLATION .)
  5. Remove the power window subswitch. (See REAR DOOR TRIM DISASSEMBLY/ASSEMBLY .)
  6. Verify that the continuity is as indicated in the table using a tester.
    • If not as indicated in the table, replace the power window subswitch.
    Fig 1: Power Window Subswitch Continuity Chart (Rear Side)
    G06941902Courtesy of MAZDA MOTORS CORP.
    Fig 2: Identifying Power Window Subswitch Circuit With Connector Terminals (Rear Side)
    G06941903Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals