LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2010 >> 6 s Touring Plus >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Power Systems >> Relay Block Removal/Installation [With Advanced Keyless Entry And Push Button Start System]
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Relay Block Removal/Installation [With Advanced Keyless Entry And Push Button Start System]

  1. Disconnect the negative battery cable
  2. Remove the lower panel. See LOWER PANEL REMOVAL/INSTALLATION .
  3. Remove the knee bolster See KNEE BOLSTER REMOVAL/INSTALLATION .
  4. Remove the wiring harness clip
  5. Remove the clips
    Fig 1: Identifying Wiring Harness Clip And Clips
    G06205732Courtesy of MAZDA MOTORS CORP.
  6. Remove the relay block
    Fig 2: Identifying Relay Block
    G06205733Courtesy of MAZDA MOTORS CORP.
  7. Disconnect the connectors
  8. Install in the reverse order of removal.
Fig 3: Identifying Relay Block And Connector
G06205734Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals