October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Ignition Switch Removal/Installation [Without Advanced Keyless Entry And Push Button Start System]
- Disconnect the negative battery cable.
- Remove the column cover. See
COLUMN COVER REMOVAL/INSTALLATION
.
- Pull the pin in the direction of the arrow shown in the figure and release the lock.
- Disconnect the connector.
Courtesy of MAZDA MOTORS CORP.
- Remove the screw.
Courtesy of MAZDA MOTORS CORP.
- Remove the tabs.
- Install in the reverse order of removal.
Courtesy of MAZDA MOTORS CORP.