LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2010 >> 6 s Touring Plus >> Repair and Diagnosis >> Body & Frame >> Glass/Windows/Mirrors >> Power Window Motor Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Power Window Motor Inspection

  1. Disconnect the negative battery cable.
  2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION .)
  3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
  4. Remove the rear door trim. (See REAR DOOR TRIM REMOVAL/INSTALLATION .)
  5. Disconnect the power window motor connector
  6. Apply battery positive voltage and connect the ground to power window motor terminals E and F, and then inspect the power window motor operation.
    • If the power window motor does not operate as indicated in the table, replace it
      POWER WINDOW MOTOR OPERATION

      Operation Terminal
      F E
      Open B+ Ground
      Close Ground B+
      Fig 1: Identifying Power Window Motor Connector With Circuit
      G06200721Courtesy of MAZDA MOTORS CORP.
  7. Connect the battery positive voltage to power window motor terminal D and connect terminal C to ground.
  8. Operate the power window motor and measure the voltage at terminals A and B.
    • If there is any malfunction, replace the power window motor

      Voltage 

      Pulse: max. 5 V/min. 0 V 

scientia non olet · About LEMON Manuals