October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
DTC P2228: Notes
DTC P2228 [L3] DETECTION CONDITIONS AND POSSIBLE CAUSES
| DTC P2228 |
BARO sensor circuit low input |
| DETECTION CONDITION |
- PCM monitors input voltage from BARO sensor. If input voltage is below 1.8 V
for 5s
, PCM determines that BARO sensor circuit has malfunction.
Diagnostic support note
- This is a continuous monitor (CCM).
- MIL illuminates if PCM detects the above malfunction condition during the first drive cycle.
- FREEZE FRAME DATA (Mode 2/Mode12) is available.
- DTC is stored in PCM memory.
|
| POSSIBLE CAUSE |
- BARO sensor malfunction
- PCM malfunction
|