LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2010 >> 5 Sport, 2.3 3, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System [L3] >> Neutral Switch Inspection >> Continuity Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Continuity Inspection

  1. Remove the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION .)
  2. Verify that the continuity between neutral switch terminals A and B is as indicated in the table.
    • If there is no malfunction, perform the "Circuit Open/Short Inspection".
    • If there is any malfunction, replace the neutral switch.
      CONTINUITY MEASURED CONDITION

      Measured condition Transmission Continuity
      Rod pushed In neutral Continuity detected
      Except above Other No continuity
      Fig 1: Inspecting Neutral Switch
      G05543217Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals