LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2010 >> 5 Sport, 2.3 3, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System [L3] >> Manifold Absolute Pressure (Map) Sensor Removal/Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Manifold Absolute Pressure (Map) Sensor Removal/Installation

  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L3] .)
  2. Disconnect the negative battery cable.
  3. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION .)
  4. Remove the vacuum hose.
  5. Disconnect the MAP sensor connector.
  6. Remove the MAP sensor installation screw.
  7. Remove MAP sensor from the intake manifold.
  8. Install in the reverse order of removal.

    Tightening torque 

    2.7-3.7 N.m {28-37 kgf.cm, 24-32 in.lbf} 

    Fig 1: Identifying MAP Sensor
    G06760903Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals