LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2010 >> 5 Sport, 2.3 3, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System [L3] >> Intake Air Temperature (IAT) Sensor Inspection >> Resistance Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Resistance Inspection

  1. Disconnect the mass air flow sensor connector.
  2. Verify that the resistance between MAF sensor terminals D and E is within the specification.
    • If the monitor item status/specification (reference) is not within the specification, even though the IAT sensor resistance is within the specification, perform the "Circuit Open/Short Inspection".
    • If not within the specification, replace the MAF sensor.

    Standard 

    RESISTANCE SPECIFICATION

    Ambient temperature (°C {°F}) Resistance (kilohm)
    -20 {-4.0} -13.6-18.4
    20 {68} 2.21-2.69
    60 {140} 0.493-0.667
    Fig 1: Identifying Intake Air Temperature Sensor Connector Terminals
    G05543227Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals