September 30: LEMON manuals is back up on a temporary server! Slowness is possible
DTC P0606: Notes
DTC P0606 [L3] DETECTION CONDITIONS AND POSSIBLE CAUSES
| DTC P0606 |
ECM/PCM processor |
| DETECTION CONDITION |
- The PCM internal CPU malfunction
- Abnormal voltage applied to PCM ignition switch terminal.
Diagnostic support note
- This is a continuous monitor (CCM).
- MIL illuminates if the PCM detects the above malfunction condition during the first drive cycle.
- FREEZE FRAME DATA (Mode 2/Mode12) is available.
- The DTC is stored in the PCM memory.
|
| POSSIBLE CAUSE |
- Voltage of 1.0 V or more is applied to PCM ignition switch terminal even though ignition switch is off.
- PCM internal CPU malfunction
|