LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2010 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Buckle Switch Inspection >> Passenger Side
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Passenger Side

  1. Switch the ignition to off.
  2. Disconnect the negative battery cable.
  3. Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION .)
  4. Remove the front buckle. (See FRONT BUCKLE REMOVAL/INSTALLATION .)
  5. Inspect for continuity between the buckle switch terminals using a tester.
    • If not as indicated in the table, replace the front buckle.
      Fig 1: Terminal Continuity Chart
      G06206105Courtesy of MAZDA MOTORS CORP.
      Fig 2: Inspecting Buckle Switch Terminals (Passenger Side)
      G06731720Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals