LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2010 >> 3 Mazdaspeed, 2.3 3 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System [L3 With TC] >> Neutral Switch Inspection
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Neutral Switch Inspection

  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L3 WITH TC] .)
  2. Disconnect the negative battery cable.
  3. Remove the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION .)
  4. Inspect for continuity between the neutral switch terminals using an ohmmeter.
    CONTINUITY CHART

    Specification
    Measured condition Continuity
    Rod pushed Continuity detected
    Except above No continuity
    Fig 1: Identifying Neutral Switch Connector Terminals
    G06205234Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals