September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Resistance Inspection
- Remove the battery cover. (See
BATTERY REMOVAL/INSTALLATION [L3 WITH TC]
.)
- Disconnect the negative battery cable.
- Disconnect MAP/boost air temperature sensor.
- Measure the resistance between the MAP/boost air temperature sensor terminals A and B using a tester.
RESISTANCE CHART
| Specification |
| Ambient temperature (°C {°F}) |
Resistance (kilohm) |
| 20 {68} |
2.4-2.7 |
| 60 {140} |
0.59-0.64 |
Courtesy of MAZDA MOTORS CORP.