Steering Specifications
STEERING SPECIFICATIONS DBW0650AA CHART
| Item | Specification |
|---|---|
| Steering Wheel Turning Effort | 4.5 Kg (10 Lb) |
| Steering Wheel Free Play | 3 mm (0.12 In) |
| Power Steering Gear | |
| Type | Rack and Pinion |
| Steering Gear Turns | 3.5-4.0 |
| Tie Rod Articulation Torque (After Breakaway) | 8-12 N.m {0.82-1.2 kg.fm, 6-9 ft.lbf} |
| Power Steering Pump | |
| Type | CII |
| Flow Rate @ 74°-80°C (165°-176°F) and Engine Set at 1500 RPM | 8.3-9.8 Liters/Minute (2.2-2.6 gpm) |
| Maximum Pressure @ 74°-80°C (165°-176°F) and Engine Speed Set at 1500 RPM | 1034 kPa (150 psi) |
| Minimum Flow Rate @ 74°-80°C (165°-176°F), 5102 kPa (740 psi) and Engine Speed Set at Idle | 4.35 Liters/Minute (1.15 gpm) |
| Relief Pressure | 8,946-10,205 kPa (1,300-1,480 psi) |
| Type | CIII |
| Flow Rate @ 74°-80°C (165°-176°F) and Engine Set at 1500 RPM | 8.3-9.8 Liters/Minute (2.2-2.6 gpm) |
| Maximum Pressure @ 74°-80°C (165°-176°F) and Engine Speed Set at 1500 RPM | 1034 kPa (150 psi) |
| Minimum Flow Rate @ 74°-80°C (165°-176°F), 5102 kPa (740 psi) and Engine Speed Set at Idle | 4.35 Liters/Minute (1.15 gpm) |
| Relief Pressure | 8,946-10,205 kPa (1,300-1,480 psi) |
| Lubricants | |
| Power Steering Fluid | ATF M-III or MERCON® |