Two-step Down Function Inspection
- Before inspecting the two-step down function, make sure that the two-step down function is turned on.
- The distance the door glass opens can be changed using the two-step down function (approx. 20-100 mm {0.79-3.93 in} ).
- The two-step down function can be made inoperative (The function is operative at the initial setting.)
- The two-step down function does not function during IG OFF timerNOTE:
- Perform the following inspection for the power window main switch and the power window subswitches for each window.
TWO-STEP DOWN FUNCTION INSPECTION CHARTSTEP INSPECTION ACTION 1 - Switch the ignition to ON.
- Turn on the two-step function, if it is turned off.
- Raise door glass completely.
- When the door glass is lowered using manual mode, does it move down to approx. 30 mm {1.2 in} from the completely closed position and stop for 1 s? (This inspection cannot be performed during IG OFF timer function operation.)
Yes - Two-step down function is normal.
- Reinspect malfunction symptoms.
No - Perform the power window initial setting procedure and verify auto-up/down operation. See
POWER WINDOW INITIALIZATION PROCEDURE
.)
- If the automatic function does not operate, go to AUTOMATIC DOOR GLASS RETURN FUNCTION INSPECTION
- If the automatic function operates but the two-step down function does not, replace the suspected power window switch