October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Two-step Down Function Inspection

Before inspecting the two-step down function, make sure that the two-step down function is turned on.
The distance the door glass opens can be changed using the two-step down function (approx. 20-100 mm {0.79-3.93 in} ).
The two-step down function can be made inoperative (The function is operative at the initial setting.)

The two-step down function does not function during IG OFF timer

NOTE:

Perform the following inspection for the power window main switch and the power window subswitches for each window.

TWO-STEP DOWN FUNCTION INSPECTION CHART

STEP	INSPECTION		ACTION
1	Switch the ignition to ON. Turn on the two-step function, if it is turned off. Raise door glass completely. When the door glass is lowered using manual mode, does it move down to approx. 30 mm {1.2 in} from the completely closed position and stop for 1 s? (This inspection cannot be performed during IG OFF timer function operation.)	Yes	Two-step down function is normal. Reinspect malfunction symptoms.
1		No	Perform the power window initial setting procedure and verify auto-up/down operation. See POWER WINDOW INITIALIZATION PROCEDURE .) If the automatic function does not operate, go to AUTOMATIC DOOR GLASS RETURN FUNCTION INSPECTION If the automatic function operates but the two-step down function does not, replace the suspected power window switch