LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2009 >> 5 Touring, 2.3 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 585 (Security System And Locks System) >> Front Inner Handle Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Front Inner Handle Removal/Installation

WARNING: This page is about a different car, the 2008 Mazda 5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L3] .)
  2. Disconnect the negative battery cable.
  3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
  4. Using a flathead screwdriver, press and hold the tab in the direction indicated by arrow (1), and remove the shaft by pulling it in the direction indicated by arrow (2).
  5. Pull off the inner handle, and remove the door lock knob cable and inner handle cable.
  6. Install in the reverse order of removal.
    Fig 1: Identifying Front Inner Handle Remove / Install Components
    G05543464Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals