LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2008 >> Tribute s Touring, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Control System - Hybrid) >> Powertrain Control Module (Pcm) - 2.3L Removal/Installation >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Powertrain Control Module (Pcm) - 2.3L Removal/Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation procedure. See PROGRAMMABLE MODULE INSTALLATION (PMI) .
    NOTE: Any PCM replacement will require that ALL customer keys are available to be programmed at the time of installation. PCM replacement DOES NOT require new keys.
  2. Remove the PCM stud bolt nut and position the wiring harness aside.
  3. Disconnect the 3 PCM electrical connectors.
  4. Remove the 2 stud bolts and the PCM.
  5. Remove the PCM cowl seal.
scientia non olet · About LEMON Manuals