October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Knock Sensor: Service and Repair

KNOCK SENSOR (KS) REMOVAL/INSTALLATION [LF]

1. Remove the battery cover.
2. Remove the negative battery cable.
3. Remove the dynamic chamber.
4. Disconnect the KS connector.

5. Remove the KS installation bolt, then remove the KS.
6. Install in the reverse order of removal.

KS tightening torque
16-24 N.m {1.7-2.4 kgf.m, 12-17 ft.lbf}