LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> RX-8 Sport, 1.3 3 >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic (Engine Control System) 13BMSP >> DTC P2136 >> Notes
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

DTC P2136: Notes

DTC P2136 DETECTION & CONDITION POSSIBLE CAUSES

DTC P2136 TP sensor No.1/No.3 (calculation value in PCM) voltage correlation problem
DETECTION CONDITION 
  • The PCM compares the input voltage from TP sensor No.1 with the input voltage from TP sensor No.3 when the engine is running. If the difference is more than the specification, the PCM determines that there is a TP sensor No.1/No.3 voltage correlation problem.

Diagnostic support note 
  • This is a continuous monitor (CCM).
  • The MIL illuminates if the PCM detects the above malfunction condition in the first drive cycle.
  • PENDING CODE is available if the PCM detects the above malfunction condition.
  • FREEZE FRAME DATA is available.
  • The DTC is stored in the PCM memory.
POSSIBLE CAUSE 
  • PCM malfunction
scientia non olet · About LEMON Manuals