October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
No. 4 Key Additional Programming Procedure Changing: Procedure
- Using the key, turn the ignition switch to the ON position. (The key can be either the valid key or an unprogrammed key)
NOTE:
- Although the security light flashes and DTC 15 is displayed when an unprogrammed key is used, this does not indicate an improper procedure. Continue to perform the procedure as indicated.
- Connect the M-MDS to the DLC-2.
- Select "BODY/SECURITY/PATS functions" from the M-MDS screen menu.
- Select "Customer spare key programming enable" or "Customer spare key programming disable" from the M-MDS screen menu. The key additional programming procedure is as follows according to the selected menu:
ADDITIONAL KEY PROGRAMMING PROCEDURE
| Setting |
Additional key programming procedure |
| Method using two valid keys |
Method using the M-MDS |
| Customer spare key programming enable |
- |
- |
| Customer spare key programming disable |
x |
- |
-: Available
x: Unavailable |
- Perform the security access according to the directions on the M-MDS screen. (See
SECURITY ACCESS PROCEDURE[ADVANCED KEYLESS SYSTEM] .)
- After verifying that the PATS function menu is displayed again on the M-MDS screen, select "Exit (From This Menu)" to finish the M-MDS procedure.
- After Step 6, wait 5 s or more
and then turn the ignition switch to the LOCK position.