October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
DRL Control Module Inspection: Notes
- Connect the connector to the DRL control module.
- Connect the negative battery cable.
- Measure the voltage at the DRL control module using voltmeter.
- When inspecting terminal 1B, 1D or 2D for continuity, disconnect the DRL control module connector.
- If the value are not as specified in TERMINAL VOLTAGE TABLE (REFERENCE)
, inspect the parts under "Inspection item(s)" and related wiring harnesses.
- If the system does not work properly even though the parts or related wiring harnesses do not have any malfunction, replace the DRL control module.