KOEO/KOER Self Test
NOTE:
- Perform a KOER self test while idling.
- Connect the M-MDS to DLC-2
- After the vehicle is identified, select the following items from the initial screen of the M-MDS.
- When using the IDS (laptop PC)
- Select the "Toolbox"tab.
- Select "Self Test".
- Select "Modules".
- Select "PCM".
- When using the PDS (Pocket PC)
- Select "Module Tests".
- Select "PCM".
- Select "Self Test".
- When using the IDS (laptop PC)
- Then, select the "KOEO On Demand Self Test" or "KOER On Demand Self Test" and perform procedures according to directions on the M-MDS screen.
- Verify the DTC according to the directions on the M-MDS screen.
- If any DTCs are displayed, perform trouble shooting according to corresponding DTC inspection.
- After completion of repairs, clear all DTCs stored in the PCM, while referring to "AFTER REPAIR PROCEDURE ".