LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> CX-7 Touring, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 408 (Conventional Brake System) >> Power Brake Unit Inspection >> Power Brake Unit Function Check (Inspection Using The Testers) >> Notes
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Power Brake Unit Function Check (Inspection Using The Testers): Notes

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the SSTs  , vacuum gauge, and pedal depression force gauge as shown in the figure.
    NOTE:
    • Use commercially available gauges and pedal depression force gauge.
    • Bleed the air from the SST  at gauge A.
  2. After bleeding the air from the SST, conduct the test as described in the following steps.
    Fig 1: Connecting SSTs Vacuum Gauge And Pedal Depression Force Gauge
    G03700239Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals