LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> B3000 Base, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Tailgate Release Handle >> Removal and Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation

  1. Remove the 8 screws and the tailgate access cover.
    • To install, tighten to 5 N-m (0.5 kgf-m, 44 in-lbf).
  2. Open the clips and disconnect the tailgate latch actuating rods from the remote control.
  3. Remove the tailgate latch remote control nuts.
    • To install, tighten to 12 Nm (1.2 kgf-m, 9 ft-lbf).
  4. Remove the tailgate release handle.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals