LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> B2300 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 301 (Power Steering System) >> Power Steering Hose Removal/Installation >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Power Steering Hose Removal/Installation: Installation

WARNING: This page is about a different car, the 2004 Mazda B4000, 2004 Mazda B3000, and 2004 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
  1. When connecting a fitting with a seal ring, the ring must be replaced.
    1. Use Seal Replacer Set 211-D027 (D90P-3517-A) or equivalent to install the return line connector seal and the pressure line connector seal.
    Fig 1: Connecting Power Steering Pump Pressure Line
    G01936520Courtesy of MAZDA MOTORS CORP.
    1. Tightening torque 
      1. 48 N.m {4.9 kgf.m, 35 ft.lbf} 
  2. Fill and leak check the system.
scientia non olet · About LEMON Manuals