Antenna - Keyless Entry: Service and Repair

KEYLESS ANTENNA REMOVAL/INSTALLATION

Driver-side/passenger-side




1. Disconnect the negative battery cable.
2. Remove the front door trim.
3. Remove the screws.
4. Disconnect the connector, then remove the keyless antenna.

Trunk Lid




1. Disconnect the negative battery cable.
2. Remove the screws.
3. Disconnect the connector, then remove the keyless antenna.

Interior, Front




1. Disconnect the negative battery cable.
2. Remove the console.
3. Remove the bolt.
4. Disconnect the connector, then remove the keyless antenna.

Interior, Middle




1. Disconnect the negative battery cable.
2. Remove the console.
3. Remove the screws.
4. Disconnect the connector, then remove the keyless antenna.

Interior, Rear




1. Disconnect the negative battery cable.
2. Remove the partition board.