Specifications Index
MAZDA6 SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | HVAC TECHNICAL DATA [L3, AJ] | ||
| Torque | See Torque Specifications in appropriate graphics under HEATER, VENTILATION & AIR CONDITIONING (HVAC) BASIC SYSTEM . | ||
| Axle Nut/Hub Nut (Front) | 174-202 Ft. Lbs. (235-274 N.m) | ||
| Battery | BATTERY INSPECTION [L3, AJ] | ||
| Brakes | |||
| Bleeding Sequence | AIR BLEEDING [L3, AJ] | ||
| Disc Brakes | BRAKES -- TECHNICAL DATA | ||
| Torque | |||
| Front | See Torque Specifications in appropriate graphics under FRONT BRAKE (DISC) REMOVAL/INSTALLATION [L3, AJ] . | ||
| Rear | See Torque Specifications in appropriate graphics under REAR BRAKE (DISC) REMOVAL/INSTALLATION . | ||
| Charging | |||
| Generator | GENERATOR INSPECTION [L3, AJ] | ||
| Torque | See Torque Specifications in appropriate graphics under GENERATOR DISASSEMBLY/ASSEMBLY [L3, AJ] . | ||
| Drive Belts | |||
| Adjustment | |||
| 2.3L 4-Cyl. (L3) | DRIVE BELT REPLACEMENT [L3] | ||
| 3.0L V6 (AJ) | FRONT DRIVE BELT | ||
| Belt Routing | |||
| 2.3L 4-Cyl. (L3) | See appropriate graphic under DRIVE BELT REPLACEMENT [L3] . | ||
| 3.0L V6 (AJ) | See appropriate graphic under DRIVE BELT REPLACEMENT [AJ] . | ||
| Engine Cooling | |||
| General Service Specifications | ENGINE TECHNICAL DATA (L3, AJ) | ||
| Radiator Cap Pressure | |||
| 2.3L 4-Cyl. (L3) | 16-20 psi | ||
| 3.0L V6 (AJ) | 14-18 psi | ||
| Thermostat R & I | |||
| 2.3L 4-Cyl. (L3) | L3 | ||
| 3.0L V6 (AJ) | AJ | ||
| Water Pump R & I | |||
| 2.3L 4-Cyl. (L3) | L3 | ||
| 3.0L V6 (AJ) | AJ | ||
| Engine Mechanical | |||
| 2.3L 4-Cyl. (L3) | |||
| Compression | COMPRESSION INSPECTION [L3] | ||
| Oil Pressure | 33.9-75.5 psi (337-591 kPa; 3.44-6.03 kg/cm2 ) at 3,000 RPM. | ||
| Overhaul | MECHANICAL - OVERHAUL - 2.0L (LF) & 2.3L (L3) | ||
| Torque | See Torque Specifications in text under MECHANICAL - OVERHAUL - 2.0L (LF) & 2.3L (L3) . | ||
| 3.0L V6 (AJ) | |||
| Compression | COMPRESSION INSPECTION [AJ] | ||
| Oil pressure | 20-45 psi (138-310 kPa; 1.4-3.17 kg/cm2 ) at 1,500 RPM. | ||
| Overhaul | MECHANICAL - OVERHAUL - 3.0L V6 (AJ WITH VARIABLE VALVE TIMING) | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate/Drive Plate Torque | |||
| 2.3L 4-Cyl. (L3) | |||
| step 1 | 37 Ft. Lbs. (50 N.m) | ||
| step 2 | 59 Ft. Lbs. (80 N.m) | ||
| Step 3 | 83 Ft. Lbs. (112 N.m) | ||
| 3.0L V6 (AJ) | 59 Ft. Lbs. (80 N.m) | ||
| Fuel System | |||
| Pressure Specification | |||
| 2.3L 4-Cyl. (L3) | 63-73 psi (430-510 kPa; 4.4-5.2 kg/cm2 ) | ||
| 3.0L V6 (AJ) | 55-65 psi (375-450 kPa; 3.9-4.5 kg/cm2 ) | ||
| Fuel Pressure Test Procedure | FUEL LINE PRESSURE INSPECTION [L3, AJ] | ||
| Fuel Filter Location and R & I | FUEL FILTER REMOVAL/INSTALLATION | ||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Ignition Wires (Resistance) | The 2.3L and 3.0L engines are equipped with coil-on-plug ignition. | ||
| Ignition Wires (Routing) | The 2.3L and 3.0L engines are equipped with coil-on-plug ignition. | ||
| Spark Plug | |||
| 2.3L 4-Cyl. (NGK ITR6F-13) | |||
| Gap | 0.050-0.053 in. (1.25-1.35 mm) | ||
| Torque | 10-14 Ft. Lbs. (14-20 N.m) | ||
| 3.0L V6 (Motorcraft AGSF-22FSCM) | |||
| Gap | 0.051-0.057 in. (1.29-1.45 mm) | ||
| Torque | 10-14 Ft. Lbs. (14-20 N.m) | ||
| Starting | |||
| Starter | STARTER INSPECTION [L3, AJ] | ||
| Torque | See Torque Specifications in appropriate graphics under STARTING SYSTEM (L3, AJ) . | ||
| Wheel Alignment | |||
| Adjustment Specifications | |||
| Front | FRONT WHEEL ALIGNMENT | ||
| Rear | REAR WHEEL ALIGNMENT | ||
| Torque | Refer to Torque Specifications included in text of each procedure under WHEEL ALIGNMENT . | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 65-87 Ft. Lbs. (88-118 N.m) | ||