LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis >> External Pages >> Different car >> Section 751 (Front Suspension System) >> Front Shock Absorber And Coil Spring Disassembly/Assembly >> Dust Boot Installation Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Dust Boot Installation Note

WARNING: This page is about a different car, the 2008 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the dust boot by hooking the bottom edge over the shock absorber lip.
    Fig 1: Installing Dust Boot
    G04955464Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals