LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis >> External Pages >> Different car >> Section 746 (Glass/Windows/Mirrors) >> Power Outer Mirror Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Power Outer Mirror Removal/Installation

WARNING: This page is about a different car, the 2008 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION .)
  3. Disconnect the power outer mirror connector.
  4. Remove the screws.
  5. Push the power outer mirror against the vehicle and detach the tab while lifting the mirror up to remove.
  6. Install in the reverse order of removal.
    Fig 1: Identifying Power Outer Mirror With Screws
    G04956778Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals