LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis >> External Pages >> Different car >> Section 681 (Washer System & Wiper System) >> Washer Fluid-Level Sensor Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Washer Fluid-Level Sensor Removal/Installation

WARNING: This page is about a different car, the 2007 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the washer tank. (See WASHER TANK REMOVAL/INSTALLATION )
  3. Disconnect the connector.
  4. Remove the washer fluid-level sensor.
  5. Remove the grommet.
  6. Install in the reverse order of removal.
    Fig 1: Identifying Washer Fluid Level Sensor
    G04957081Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals