Washer Fluid-Level Sensor Inspection

WARNING: This page is about a different car, the 2007 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Inspect for continuity between the washer fluid-level sensor terminals using an ohmmeter.
- If not as specified, replace the washer fluid-level sensor.
  
  Fig 1: Terminal Continuity Chart
  Courtesy of MAZDA MOTORS CORP.
  
  Fig 2: Identifying Washer Fluid Level Sensor Connector Terminals
  Courtesy of MAZDA MOTORS CORP.