SST Installation Note

WARNING: This page is about a different car, the 2007 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Align the SST guide with the sirocco fan clip position and press the SST tabs (3) into the three set holes on the blower motor until they are inserted.

Fig 1: Aligning SST Guide With Sirocco Fan Clip Position
Courtesy of MAZDA MOTORS CORP.

Fig 2: Identifying Special Tool
Courtesy of MAZDA MOTORS CORP.
Rotate the SST (49 B061 015) clockwise to lock the SST and blower motor.

Fig 3: Identifying Special Tool
Courtesy of MAZDA MOTORS CORP.