LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis >> External Pages >> Different car >> Section 544 (Dynamic Stability Control System) >> DSC HU/Cm Removal/Installation >> DSC HU/CM Connector Removal Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DSC HU/CM Connector Removal Note

WARNING: This page is about a different car, the 2007 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull the lock lever up in the direction of the arrow.
  2. Pull the connector toward the vehicle rear and remove it.
    Fig 1: Identifying Lock Lever Position
    G04318438Courtesy of MAZDA MOTORS CORP.