LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (L3 With TC) >> Neutral Switch Inspection >> Continuity Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Continuity Inspection

  1. Disconnect the negative battery cable.
  2. Remove the neutral switch. (See MANUAL TRANSAXLE REMOVAL/INSTALLATION ).
  3. Inspect for continuity between the neutral switch terminals using a tester.
    • If the neutral switch is normal, but PID value is out of specification, perform the "Circuit Open/Short Inspection".
    • If not as specified, replace the neutral switch.

Specification 

Fig 1: Terminals Continuity Table
G04325226Courtesy of MAZDA MOTORS CORP.
Fig 2: Identifying Neutral Switch Connector Terminals
G04325227Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals