Check code 58

CHECK CODE 58 REFERENCE (BUCKLE (PASSENGER'S SIDE) SWITCH)

Check code 58	Buckle (passenger's side) switch on/off signal

CHECK CODE 58 DIAGNOSTIC PROCEDURE

STEP	INSPECTION	ACTION
1	Seat one person in the passenger's seat, and unfasten passenger-side seat belt. (Seat weight sensor and buckle switch ON)	Go to next step.
1		Measure voltage at instrument cluster terminal 1 A. Is voltage 0 V? If as specified, replace instrument cluster. If not as specified, inspect following parts. Buckle switch (passenger's side) Seat weight sensor control module Seat weight sensor SAS control module Wiring harness (Buckle switch (passenger's side)-SAS control module, seat weight sensor-Seat weight sense control module-SAS control module)
2	Seat one person in the passenger's seat, and fasten passenger-side seat belt. (Seat weight sensor ON and buckle switch OFF) Seat no person in the passenger's seat, and unfasten passenger-side seat belt. (Seat weight sensor OFF and buckle switch ON) Seat no person in the passenger's seat, and fasten passenger-side seat belt. (Seat weight sensor and buckle switch OFF)	Measure voltage at instrument cluster terminal 1 A. Is voltage B+? If as specified, replace instrument cluster. If not as specified, inspect following parts. Buckle switch (passenger's side) Seat weight sensor control module Seat weight sensor SAS control module Wiring harness (Buckle switch (passenger's side)-SAS control module, seat weight sensor-Seat weight sense control module-SAS control module)
2		Input signal to instrument cluster is okay.