October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Abs/TCS HU/Cm Configuration
- Connect the M-MDS to the DLC-2.
- After the vehicle is identified, select the following items from the initial screen of the M-MDS.
- When using the IDS (laptop PC)
- Select the "Module Programming".
- When using the PDS (Pocket PC)
- Select "Programming".
- Select "Module Programming".
- Then, select the "PROGRAMMABLE MODULE INSTALLATION" and "ABS" from the screen menu.
- Perform the configuration according to the directions on the screen.
- Retrieve the DTCs using the M-MDS, then verify if DTCs are present.