LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> 5 L4-2.3L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Monitors, Trips, Drive Cycles and Readiness Codes >> On-Board System Readiness Tests Access Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

On-Board System Readiness Tests Access Procedure

On-Board System Readiness Tests Access Procedure




1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
- When using the IDS (laptop PC)
1. Select the "Toolbox" tab.
2. Select "Powertrain".
3. Select "OBD Test Modes".
4. Select "Mode 1 Powertrain Data".

- When using the PDS (Pocket PC)
1. Select "OBD II Modes".
2. Select "Mode 1 Powertrain Data".

3. Then, select the "SUP" and "EVAL" PIDs in the PID selection screen.
4. Monitor those PIDs and check it system monitor is completed.
scientia non olet · About LEMON Manuals