LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> 3 Mazdaspeed, 2.3 L >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Front Buckle Removal/Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Front Buckle Removal/Installation

  1. Turn the ignition switch to the LOCK position.
  2. Disconnect the negative battery cable.
  3. Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION .)
  4. Detach the tab as shown in the figure and remove the connector from the front seat connector.
    Fig 1: Identifying Front Buckle Connector
    G04956530Courtesy of MAZDA MOTORS CORP.
  5. 5 Remove in the order indicated in the table.
    Fig 2: Front Buckle And Bolt With Torque Specifications
    G04956531Courtesy of MAZDA MOTORS CORP.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals