LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> 3 Mazdaspeed, 2.3 L >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System >> Seat Weight Sensor Control Module Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Seat Weight Sensor Control Module Removal/Installation

CAUTION:
  • When the seat weight sensor control module is replaced with a new one, perform the seat weight sensor calibration using the M-MDS. (See SEAT WEIGHT SENSOR CALIBRATION ).
  1. Turn the ignition switch to the LOCK position.
  2. Disconnect the negative battery cable and wait for 1 min or more. 
  3. Remove the front passenger's seat. (See FRONT SEAT REMOVAL/INSTALLATION .)
  4. Remove in the order indicated in the table.
    Fig 1: Identifying Seat Weight Sensor Control Module Components
    G04956459Courtesy of MAZDA MOTORS CORP.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals