July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DTC P2228: Notes

DTC P2228 [L3 WITH TC] DETECTION CONDITION AND POSSIBLE CAUSE

DTC P2228

BARO sensor circuit low input

DETECTION CONDITION

PCM monitors the input voltage from the BARO sensor. If the input voltage at the PCM is below 1.95 V , the PCM determines that the BARO sensor circuit has a malfunction.

Diagnostic support note

This is a continuous monitor (CCM).
MIL illuminates if the PCM detects the above malfunction condition during the first drive cycle.
FREEZE FRAME DATA is available.
DTCs are stored in the PCM memory.

POSSIBLE CAUSE

BARO sensor malfunction PCM malfunction
Diagnostic procedure