LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> Tribute s, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Idle Air Control (IAC) Valve - 2.3L >> Removal and Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal and Installation

  1. Remove the air cleaner outlet tube. See AIR CLEANER OUTLET PIPE - 2.3L .
  2. Remove the upper snow shield.
    • Remove the upper snow shield-to-intake manifold screw.
    • Remove the upper snow shield-to-intake manifold pin-type retainer.
  3. Remove the lower snow shield.
    • Remove the lower snow shield-to-intake manifold screws (2 req'd).
      Fig 1: Disconnecting Idle Air Control (IAC) Valve Electrical Connector
      G04320331Courtesy of MAZDA MOTORS CORP.
  4. Disconnect the idle air control (IAC) valve electrical connector.
  5. Remove the two bolts and the IAC valve.
    • Discard the gasket.
  6. To install, reverse the removal procedure.
    • Install a new gasket.
scientia non olet · About LEMON Manuals